YouTube Video of the Building and Testing of the Candy Cane Pixel Arches:
(10) Candy Canes from Walmart (2.5' tall)
(10) Pixel Nodes per Candy Cane, totaling 100 per set
(1) E682 Controller from SanDevices
(1) 350w Power Supply
(1) CG1500 enclosure
Front side of the Candy Cane Pixel Arches.
Front vie of the hub, wires from each string of lights going under the center to the controller.
Controller box, with an E682 and a 350w power supply.
A test set of nodes. The box is a CG1500.
Back side. PVC has been glued to the center spokes for stability and provide a way to hold the rebar.
Back side of the hub. Rebar is used to hold the set up, and keep them from moving.
Notice the way the nodes are sitting in the candy cane.
Pixel strands going from one cane to another.
This is my configuration on the controller.
Unmodified Candy Canes, and a few pieces of Rope Light Spool, cut in half.
When building these, you will want to use the white candy canes, as the other colors will filter the light from the pixels, and not give you the same results. The hub the canes are mounted to, I used LED Rope Light Spools, and cut them. This pic is from another Light Show Enthusiest (Carlos Barreto), as he is prepping to design his version of Candy Cane Pixel Arches.
First, remove the caps on the candy canes, and pull the incandescent bulbs out. Lay the canes into your arraignment, and use white zip-ties to hold opposing canes together. Next, the threading of the lights.
How to thread pixels into the candy canes:
Use a squirt bottle with a soapy solution (Dish Soap), about 10 squirts into he candy cane, and pull the pixels through with string. Lay the wire flat along the nodes, and guide them in one at a time.
Once built, the channels need to be built into LOR so you can sequence them. Here are some charts I made to help with the programming and planning for effects.
Layout from LOR Visualizer
With DMX only labels
With DMX and Channel Numbers
Easy planning for an effect
(Rainbow Sweep)
Easy Planning for an effect
(Standard Rainbow)
These are the WS2811 Pixels. Not the exact same ones I used, but these are the better versions. 3 wires instead of 4, and the same size.
I am sharing the Macros I have developed for various effects, to include the sequence for the song here. This is "Dueling Jingle Bells" performed by the US Navy Band.
Here is the link to the Macros and the Sequence shown above:
No comments:
Post a Comment